HSV V2
Vibration Sensor
High Frequency
About
HSV V2 is a vibration sensor working on the principle of sensing acceleration from the PIEZO acceleration sensor and subsequent evaluation of acceleration within a specified time interval. From the measured value of acceleration, we can calculate the minimum value, maximum value, peak value, rms, crest-factor and kurtosis in 1 second-time interval.
The HSV V2 vibration sensor is used to detect high frequency vibrations.
Features
- Amplitude range ±25 G
- Sample rate 20kHz
- PIEZO accelerometer
- MIN, MAX, PEAK, RMS outputs
- MODBUS communications protocol
- Calculation of CREST FACTOR and KURTOSIS
- RS485 interface
- Power supply 4,5 – 5,5V
Technical
data
| Power supply | 4.5 – 5.5V DC |
| Outputs | 1x RS485 |
| Communication | RS485 |
| Protocol | MODBUS RTU |
| Time interval | 1000 ms |
| Calculated data | MIN, MAX, PEAK, RMS, CREST FACTOR, KURTOSIS |
| Sample rate | 20kHz ( float ± 10% ) |
| Configuration protection | password |
| Operating temperature | between -20 and +55°C |
| Protection degree | IP67 |
| Installation | screw mounting, 3 ks M8 x 28mm |
| Dimensions | 98 x 18 x ø25mm |
| Weight | 50g without wires |
Other products
HDL 4000
Data logger for data collection
RS 485/ETH
RS 485/ETH to ethernet converter
HTS Terminal
Stationary terminal unit
Are you interested in cooperation?
We will prepare a unique tailor-made solution for you.
Research and development of technologies and equipment in the energy sector. Remote meter reading, process measurement and regulation. Monitoring of equipment efficiency and workforce performance.
IMS NOETiC i4.0
Products
Services
Kontact
HAKO, a.s.
Štefánikova 1361/4
031 01 Liptovský Mikuláš
hako@hako.sk
+421 918 673 607
1998 – 2024 HAKO, a.s. All rights reserved.
